MARUNI PLUG PATCH EV 35x4.5mm

MARUNI EV Mushroom Plug 35x4.5mm with Wire – For Electric Vehicle Tire Repairs

NOTE! Please order the product in multiples of 5 pieces, as the plugs are packaged in sets of 5.

The MARUNI EV Mushroom Plug is an innovative solution combining the functions of a patch and a plug, ideal for repairing both diagonal and radial tires on electric vehicles. Thanks to its design, these plugs provide convenient and safe repairs, filling the damage channel while protecting the tire's metal bead from corrosion.

Complete Repair: Mushroom plugs allow for quick and durable sealing of punctures, ensuring a comprehensive repair.
Corrosion Protection: Using the plug protects the tire's internal structure, preventing the metal elements from rusting.
Application: The plugs can be used for punctures in the tread at an angle not exceeding 20 degrees. For larger damage, it is recommended to use the Stem plug.

How to Properly Repair a Tire Using a Maruni Plug

Use pliers to remove foreign objects from the tire, then mark the damaged area with chalk.	Drill the damage area several times with a reamer from the outside of the tire.	Drill the damage area several times with a reamer from the inside of the tire as well.
Position the plug so that the damaged area is centered in the mushroom shape, then trace an area slightly larger than the plug.	Apply Buffer to the marked area to dissolve grease and dirt on the adhesion surface.	Use a scraper to remove contaminants.
Use a slow-speed grinder to roughen the marked area.	Use a pneumatic vacuum cleaner to remove shavings and dirt.	Evenly and thoroughly apply MARUNI Super Valkarn vulcanizing fluid and wait for it to dry completely.
Introduce a few drops of fluid into the damage channel.	Coat the black part of the plug with Super Valkarn.	Loosen the reamer. Insert the plug wire into the damage channel from the inside of the tire. Do not touch the adhesion area of the patch to the tire.
Pull the plug through using pliers.	Press the mushroom plug with a roller from the center to the edge, removing air from the adhesion area.	Cut the plug so that a 2-3mm section remains from the tire.
Coat the area around the mushroom with Sealiner to prevent air leakage. The repair is complete.