Ilość
Previous
Next
RADIAL PATCH MARUNI MR-10 56x77mm
High-Performance Tire Repair Patches – Maruni MR
Crafted from reinforced, durable, and flexible rubber, these repair patches are embedded with strong nylon fibers and coated with a special high-temperature-resistant layer. They are designed for permanent tire repairs and suitable for both cold and hot vulcanization methods.
Key Features:
-
Enables the repair of damage in any part of the tire, within repairable limits.
-
Allows for large damage to be repaired using a relatively small insert.
-
Fast and reliable vulcanization process.
-
Compatible with both cold and hot repair applications.
-
For best results, use in combination with Super Valkarn vulcanizing cement and Sealiner Sealant.
Tire Repair Using Maruni MR Patch and STEM Plug – Step-by-Step:
-
Use pliers to remove any foreign object from the puncture and mark the damaged area with chalk.
-
Ream the hole multiple times from both the inside and outside of the tire using a carbide cutter.
-
Thread the STEM plug through the insertion tool (not necessary for plugs with integrated wire).
-
Remove the protective film from the STEM plug and coat it with Super Valkarn vulcanizing cement.
-
Apply a small amount of Super Valkarn into the puncture channel.
-
Pull the plug through the tire using pliers from the outside, ensuring part of the plug protrudes inside the tire.
-
Cut the inner end of the plug to leave 2–3 mm above the tire’s inner surface.
-
Position the MR patch over the puncture and mark a slightly larger area with chalk. Ensure the direction arrows point toward the bead of the tire.
-
Clean and chemically roughen the marked area using Liquid Buffer. Remove dirt and grease with a scraper.
-
Use a pneumatic vacuum to clear away dust and rubber particles.
-
Evenly apply Super Valkarn to the prepared surface and wait until it dries completely.
-
Remove the protective layer from the MR patch without touching the bonding area. Apply it to the tire, ensuring correct alignment.
-
Press the patch firmly using a roller, starting from the center outward to eliminate air bubbles.
-
Cut the protruding end of the plug on the outer side of the tire, leaving 2–3 mm.
-
Seal the repaired area with Maruni Sealiner to prevent air leaks.
Repair is now complete.